[Lead2pass New] Free Lead2pass 400-051 PDF Guarantee 100% Get 400-051 Certification (141-160)

2017 October Cisco Official New Released 400-051 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Are you interested in successfully completing the Cisco 400-051 Certification Then start to earning Salary? Lead2pass has leading edge developed Cisco exam questions that will ensure you pass this 400-051 exam! Lead2pass delivers you the most accurate, current and latest updated 400-051 Certification exam questions and available with a 100% money back guarantee promise!

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/400-051.html

QUESTION 141
Which statement about the effective path in the Enhanced Location Call Admission Control mechanism on Cisco Unified Communications Manager is true?

A.    It is a sequence of links and intermediate locations that connect a pair of locations.
B.    It is used to define the bandwidth that is available between locations.
C.    Only one effective path is used between two locations.
D.    There could be multiple effective paths between a pair of locations.
E.    It logically represents the WAN link.

Answer: C
Explanation:
The effective path is the path used by Unified CM for the bandwidth calculations, and it has the least cumulative weight of all possible paths. Weights are used on links to provide a “cost” for the “effective path” and are pertinent only when there is more than one path between any two locations.

QUESTION 142
Which configuration component in Cisco Unified Communications Manager Enhanced Location Call Admission Control is designated to participate directly in intercluster replication of location, links, and bandwidth allocation data?

A.    an active member of a Location Bandwidth Manager Group
B.    a member of a Location Bandwidth Manager Hub Group
C.    a standby member of a Location Bandwidth Manager Group
D.    all members of a Location Bandwidth Manager Group
E.    a shadow member of a Location Bandwidth Manager Hub Group

Answer: B
Explanation:
A Location Bandwidth Manager (LBM) service that has been designated to participate directly in intercluster replication of fixed locations, links data, and dynamic bandwidth allocation data. LBMs assigned to an LBM hub group discover each other through their common connections and form a fully-meshed intercluster replication network. Other LBM services in a cluster with an LBM hub participate indirectly in intercluster replication through the LBM hubs in their cluster.

QUESTION 143
What is the amount of audio bandwidth, in kilobits per second, that is used in the Cisco Unified Communications Manager location bandwidth calculation for a G.728 call?

A.    8
B.    16
C.    24
D.    29
E.    80

Answer: B
Explanation:
G.728–Low-bit-rate codec that video endpoints support.It support kilobits per second

QUESTION 144
When neither the active or standby Location Bandwidth Manager in the configured LBM group is available, what will the Cisco CallManager service on a subscriber Cisco Unified Communications Manager server do to make location CAC decisions?

A.    It will attempt to communicate with the first configured member in the Location Bandwidth Manager hub group.
B.    It will use the Call Treatment When No LBM Available service parameter with the default action to allow calls.
C.    It will use the Call Treatment When No LBM Available service parameter with the default action to reject calls.
D.    It will attempt to communicate with the local LBM service for location CAC decisions.
E.    It will allow all calls until communication is reestablished with any configured servers in the LBM group.

Answer: D
Explanation:
By default the Cisco CallManager service communicates with the local LBM service; however, LBM groups can be used to manage this communication. LBM groups provide an active and standby LBM in order to create redundancy for Unified CM call control.

QUESTION 145
Which system location is used for intercluster Enhanced Location CAC on Cisco Unified Communications Manager?

A.    Hub_None
B.    Default
C.    Intercluster
D.    Phantom
E.    Shadow

Answer: E
Explanation:
The shadow location is used to enable a SIP trunk to pass Enhanced Location CAC information such as location name and Video-Traffic-Class (discussed below), among other things, required for Enhanced Location CAC to function between clusters. In order to pass this location information across clusters, the SIP intercluster trunk (ICT) must be assigned to the “shadow” location. The shadow location cannot have a link to other locations, and therefore no bandwidth can be reserved between the shadow location and other locations. Any device other than a SIP ICT that is assigned to the shadow location will be treated as if it was associated to Hub_None. That is important to know because if a device other than a SIP ICT ends up in the shadow location, bandwidth deductions will be made from that device as if it were in Hub_None, and that could have varying effects depending on the location and links configuration.

QUESTION 146
Refer to the exhibit. All displayed devices are registered to the same Cisco Unified Communications Manager server and the phones are engaged in an active call. Assuming the provided configurations exist at the phone line level and multicast MOH is disabled clusterwide, what will happen when the user of IP Phone B presses the Hold softkey?

A.    IP Phone A receives audio source 2 from MOH Server A.
B.    IP Phone A receives audio source 3 from MOH Server A.
C.    IP Phone A receives audio source 2 from MOH Server B.
D.    IP Phone A receives audio source 3 from MOH Server B.
E.    IP Phone A receives audio source 1 from MOH Server A.

Answer: B
Explanation:
Held parties determine the media resource group list that a Cisco Unified Communications Manager uses to allocate a music on hold resource.

QUESTION 147
Refer to the exhibit. All displayed devices are registered to the same Cisco Unified Communications Manager server and the phones are engaged in an active call. Assuming the provided configurations exist at the phone line level and multicast MOH is disabled clusterwide, what will happen when the user of IP Phone A presses the Transfer softkey?

A.    The IP Phone B user hears audio source 3 from MOH Server A.
B.    The IP Phone B user hears audio source 4 from MOH Server B.
C.    The IP Phone B user hears audio source 3 from MOH Server B.
D.    The IP Phone B user hears audio source 2 from MOH Server B.
E.    The IP Phone A user hears no on-hold music.

Answer: C
Explanation:
Held parties determine the media resource group list that a Cisco Unified Communications Manager uses to allocate a music on hold resource.

QUESTION 148
Router A and router B are Cisco IOS routers with hardware CFB resources that are registered to the same Cisco Unified Communications Manager server. Which Media Resource Group and Media Resource Group List configuration should be implemented if an administrator wants to make sure that all provisioned DSPs on router A are consumed before router B’s DSP is used?

A.    Router A’s CFB and router B’s CFB should each be configured in its own MRG.
Both MRGs should then be grouped into the same MRGL, but the MRG that contains router A’s CFB
should be listed in higher order than the MRG that contains router B’s CFB. Finally, associate the MRGL
to all conference resource consumers.
B.    Router A’s CFB and router B’s CFB should each be configured in its own MRG.
Both MRGs should then be further separated into different MRGLs.
Finally, associate the MRGL that contains router A’s CFB in higher order than router B’s CFB to all
conference resource consumers.
C.    Router A’s CFB and router B’s CFB should both be configured in the same MRG with router A’s CFB
listed higher than that of router B.
Then associate the MRG with an MRGL and apply it to all conference resource consumers.
D.    Router A’s CFB and router B’s CFB should both be configured in the same MRG.
Make sure router A’s CFB is listed in a higher alphabetical order than router B’s CFB.
Then associate the MRG with an MRGL and apply it to all conference resource consumers.
E.    Router A’s CFB and router B’s CFB should both be configured in the same MRG.
Use Cisco Unified Communications Manager service parameters to assign a higher priority to router A’s CFB.
Then associate the MRG with an MRGL and apply it to all conference resource consumers.

Answer: A

QUESTION 149
Which Device Pool configuration setting will override the device-level settings only when a device is roaming within a device mobility group?

A.    Region
B.    Location
C.    SRST Reference
D.    Calling Party Transformation CSS
E.    Media Resource Group List

Answer: D
Explanation:
Device Mobility Related Settings:
The parameters under these settings will override the device-level settings only when the device is roaming within a Device Mobility Group. The parameters included in these settings are:
Device Mobility Calling Search Space
AAR Calling Search Space
AAR Group
Calling Party Transformation CSS
Called Party Transformation CSS
The device mobility related settings affect the dial plan because the calling search space dictates the patterns that can be dialed or the devices that can be reached.

QUESTION 150
Which two Device Pool configuration settings will override the device-level settings when a device is roaming within or outside a device mobility group? (Choose two.)

A.    Adjunct CSS
B.    Device Mobility CSS
C.    Network Locale
D.    Called Party Transformation CSS
E.    AAR CSS
F.    Device Mobility Group

Answer: CF

QUESTION 151
A company that is using the Cisco Unified Contact Center Express Enhanced version requires that selected types of agent calls are automatically recorded. Which call recording operation can be used to satisfy this requirement?

A.    Instruct agents to use the Record button on Cisco IPPA to trigger recording.
B.    Instruct supervisors to use the Record button on Cisco Agent Desktop to trigger recording.
C.    Instruct supervisors to use the Record button on Cisco Supervisor Desktop to trigger recording.
D.    Configure the Cisco Agent Desktop workflow to trigger recording.
E.    Recording is not supported on the Cisco Unified CCX Enhanced version. It is supported only on the
Premium version.

Answer: D

QUESTION 152
What is the default switchback method for an SCCP hardware transcoder when a higher-priority Cisco Unified Communications Manager becomes available again?

A.    graceful
B.    immediate
C.    uptime
D.    never
E.    guard

Answer: E

QUESTION 153
Which of these is not a valid switchback method for SCCP hardware conference bridges?

A.    immediate
B.    never
C.    graceful
D.    guard
E.    uptime

Answer: B

QUESTION 154
Which statement about MRGL on Cisco Unified Communications Manager is incorrect?

A.    MRGL can be assigned to devices at the device level, device pool level, or both.
B.    MRGL contains a prioritized list of Media Resource Groups.
C.    Media resources that are not contained in any Media Resource Groups are not used by MRGL.
D.    MRGL can contain a single Media Resource Group.
E.    When a call is placed on hold, the MRGL of the device that put the call on hold determines which
MOH server is used to play music to the held device.

Answer: C

QUESTION 155
Which three services must be activated on Cisco Unified Presence in order for presence and instant messaging to be functional? (Choose three.)

A.    Cisco Unified Presence SIP Proxy
B.    Cisco AXL Web Service
C.    Cisco Bulk Provisioning Service
D.    Cisco Unified Presence Engine
E.    Cisco Unified Presence Sync Agent
F.    Cisco Serviceability Reporter

Answer: ADE

QUESTION 156
What is the relationship between a device pool and a region in CallManager configuration?

A.    The device pool sets the default codec for the devices associated with it in a specific region and
region sets only the codec that is used between other regions.
B.    Devices acquire a region setting from the device pool to which they are assigned.
C.    The device pool sets the intra-region and inter-region codecs and the region makes the association
between it and other regions.
D.    Devices use the settings in the region as the default pool for that region.

Answer: B

QUESTION 157
Which two conditions will result in an H.323 gatekeeper receiving an ARQ from a registered H.323 endpoint? (Choose two.)

A.    A remote zone endpoint initiates a call.
B.    A local zone endpoint requests permission to admit an incoming call.
C.    A remote zone endpoint sends keepalive to ensure registration continuity.
D.    A remote zone gatekeeper initiates a call.
E.    A local zone endpoint initiates a call.
F.    A local zone endpoint sends keepalive to ensure registration continuity.

Answer: BE

QUESTION 158
Which string is not a valid route pattern on Cisco Unified Communications Manager?

A.    123@
B.    123.
C.    123*
D.    123$
E.    123?

Answer: D

QUESTION 159
Which R2 signaling element passes address information such as calling- and called-party numbers?

A.    pulse signaling
B.    delaydial signaling
C.    line signaling
D.    interregister signaling
E.    out-of-band signaling

Answer: D

QUESTION 160
Refer to the exhibit. In this 802.1Q tagged Ethernet frame, which block of bits, labeled A, B, C, and D, is used as TPID?

A.    A.
B.    B
C.    C
D.    D

Answer: A

All Cisco 400-051 exam questions are the new checked and updated! In recent years, the 400-051 certification has become a global standard for many successful IT companies. Want to become a certified Cisco professional? Download Lead2pass 2017 latest released 400-051 exam dumps full version and pass 400-051 100%!

400-051 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDcVpjV1ZNcjVzaW8

2017 Cisco 400-051 exam dumps (All 542 Q&As) from Lead2pass:

http://www.lead2pass.com/400-051.html [100% Exam Pass Guaranteed]